#The100DayProject

Day 85

https://instagram.com/p/6v65_CA5bY/?taken-by=funvill

Some of the gifts that i will be hanging from the roof of the dome. They will have ribbons so you can wear them around your neck

Day 86

https://instagram.com/p/6v_wNkA5Tl/?taken-by=funvill

This mask was designed by http://wintercroft.com/ I purchased the plans and cut it out with chloroplast. I have a few sheets of mirrored acrylic that i plan to cut and glue the mirrored panels on to the mask.

Day 87

https://instagram.com/p/6wBdunA5WT/?taken-by=funvill

A large map of Black rock city burning man. I am going to use this as a where are you located map for the camp. People will be able to add push pins and flags to the map to identify awesome things.

Day 88

https://instagram.com/p/6x36JCA5ZG/?taken-by=funvill

Preying mantis with a top hat stencil for #burningman, made with vhs #lasercutter. 88 of 100 for #the100dayproject. #insect #bug #laser #wood #preyingmantis #tophat #fancybugs

So fancy !

1 Like

Day 89

https://instagram.com/p/6x6E8YA5dl/?taken-by=funvill

Jumping spider with a top hat stencil for #burningman, made with vhs #lasercutter. 89 of 100 for #the100dayproject. #insect #bug #laser #wood #tophat #fancybugs #spider #jumpingspider

Hes a genital bug!

1 Like

Day 90

https://instagram.com/p/6z6ZaZA5dq/?taken-by=funvill

Blowfly in a top hat stencil for #burningman. Made with @vhs #lasercutter. 90 of 100 for #the100dayproject. #insect #bug #laser #wood #blowfly #tophat #fancybugs #fancy

Day 91

https://instagram.com/p/6z6vmzA5eT/?taken-by=funvill

American Cockroach in a top hat stencil for #burningman. Made with @vhs #lasercutter. 91 of 100 for #the100dayproject. #insect #bug #laser #wood #tophat #fancybugs #fancy #cockroach #roach

Day 92

https://instagram.com/p/60cTPoA5co/

Yellow jacket in a top hat stencil for #burningman. Made with @vhs #lasercutter. 92 of 100 for #the100dayproject. #insect #bug #laser #wood #tophat #fancybugs #yellowjacket #yellowjackets #phancy

Day 93

https://instagram.com/p/7CVXrFA5TX/?taken-by=funvill

Led belt I made for #burningman. Using #neopixels. #led #colors #pixel #paterens #rave #glow

Day 94

https://instagram.com/p/7DKuccg5da/

Radiant acrylic mask for #burningman. Mask pattern design by @wintercroft. Made with @vhs #lasercutter. I used the wrong glue (gorilla glue) and it foamed up under the acrylic plates, distorting them. The glue also ate through some of the acrylic foil discoloring it. I’m not happy with the way this turned out and will have to make a new version. 94 of 100 for #the100dayproject. #masks #lowpoly #foxmask #fox #foxy #acrylic

Day 95

https://instagram.com/p/7w2y4DA5YG/?taken-by=funvill

This is the code from the I Stand with Ahmed Arduino Binary clock Workshop #IStandWithAhmed workshop. Its a simple binary count up clock using a WS2811 LED strip and an Arduino. The source code as always can be found on my github page. GitHub - funvill/ArduinoBinaryClock

2 Likes

Day 96

WARNING THIS IS NOT A BOMB

https://instagram.com/p/79p2IRg5SG/?taken-by=funvill

Seriously its not a BOMB. Its got a a few LEDs and three seven segment displays and it beeps. Still not a bomb. It triggers a relay under certain conditions, Still not a bomb. Its a sous vide, PID temperature controller box. I use it to cook food not explode things, NOT A BOMB!

1 Like

Dude, that’s awesome!

1 Like

Day 97
https://instagram.com/p/842YEXg5aG/?taken-by=funvill

A really big version of the masks I made in day 94. This is about 1.5 meters across and made of coroplast. Build during the Giant fox head build night at VHS

1 Like

That’s awesome! Any pointers for a guy fawkes low-res? :wink:

Day 98

https://instagram.com/p/9VNZ2ng5fO/

Working on a hat for Halloween, Neopixel LEDs and an Arduino

1 Like

Day 99

https://www.instagram.com/p/_RG5lqA5eQ/?taken-by=funvill

Testing different patterns for the firefly room on VHS’s LED wall.
Source code: GitHub - funvill/Firefly-Installtion

1 Like

Day 100

https://www.instagram.com/p/_RHahig5ev/?taken-by=funvill

Esp8266 to IFTTT awesome Internet button for and upcoming workshop at VHS.

3 Likes

It would be cool to make one of those animated , where legs move and grass moves in circle

This topic was automatically closed 2 hours after the last reply. New replies are no longer allowed.