These little guys are called kodama and were my favorite from Princess Mononoke made by Studio Ghibli. If you have never seen this film is well worth it.
I need some different color paper! I have run out of everything but black and white. In this one I experimented with reducing the distance between each layer down from 10mm to 5mm. I think it works better.
Little red riding hood. The wolf is in the wrong spot! I really like the trees in this version. I think i will experiment with more trees in the future.
Failed #SamuraiJack#layered#laser#papercut. I got the layers order mixed up and the #aku is too small to see the details. His face in all three versions collapse in on its self. I am going to try this one again in the future.
A glow in the dark, 3D printed, Unicorn horn made for Burning man, Printed at VHS, designed by AdaFruit. I will add some color changing LEDs to it later on.
Double 3d printed #unicorn horns, with glowing leds made for @burningman. Design by @adafruit printed at @vhs. #3dprint#unicorns#magic#gowinthedark#horn#costume
A small (20x10 inches) scale prototype pylon lantern.
The next prototype versions will be much smaller as this one took too long to cut. I want shorten the tabs, extend the voronoi pattern to the edge of the face and integrate it with the slots for the tabs.
I am not so set on the voronoi pattern either. I am going to try some different patterns to see what works. In the end I want this to be around 7 feet tall.
Part of the MeeBox project for burning man. This is a Visualization of my DNA. Data is from 23andme and I used processing to make the image. This is a very small sub section of the entire image. Eventually this will be laser engraved into a box.
A box for people to “gift” me things at burning man. Its going into the center of the dome and there will be trinkets and pendents hanging from the ceiling for people to take. if they want to they can drop one of their own trinkets into the box for me.
The box is two boxes inside of each other. The lid fits snugly on top. if I ever made another box like this, i will find a design that it has a solid section on the lip of the lid. This works but looks weird.
This mask was designed by http://wintercroft.com/ I purchased the plans and cut it out with chloroplast. I have a few sheets of mirrored acrylic that i plan to cut and glue the mirrored panels on to the mask.
A large map of Black rock city burning man. I am going to use this as a where are you located map for the camp. People will be able to add push pins and flags to the map to identify awesome things.
Preying mantis with a top hat stencil for #burningman, made with vhs #lasercutter. 88 of 100 for #the100dayproject. #insect#bug#laser#wood#preyingmantis#tophat#fancybugs
Jumping spider with a top hat stencil for #burningman, made with vhs #lasercutter. 89 of 100 for #the100dayproject. #insect#bug#laser#wood#tophat#fancybugs#spider#jumpingspider
Blowfly in a top hat stencil for #burningman. Made with @vhs#lasercutter. 90 of 100 for #the100dayproject. #insect#bug#laser#wood#blowfly#tophat#fancybugs#fancy
American Cockroach in a top hat stencil for #burningman. Made with @vhs#lasercutter. 91 of 100 for #the100dayproject. #insect#bug#laser#wood#tophat#fancybugs#fancy#cockroach#roach
Yellow jacket in a top hat stencil for #burningman. Made with @vhs#lasercutter. 92 of 100 for #the100dayproject. #insect#bug#laser#wood#tophat#fancybugs#yellowjacket#yellowjackets#phancy
Radiant acrylic mask for #burningman. Mask pattern design by @wintercroft. Made with @vhs#lasercutter. I used the wrong glue (gorilla glue) and it foamed up under the acrylic plates, distorting them. The glue also ate through some of the acrylic foil discoloring it. I’m not happy with the way this turned out and will have to make a new version. 94 of 100 for #the100dayproject. #masks#lowpoly#foxmask#fox#foxy#acrylic