Day 19
https://instagram.com/p/2gzti1g5Zw/?taken-by=funvill
A failed design for the pocket universe project. I was trying to see if a maze would work for one of the panels. The problem is that the maze paths are only connected to the size at one point. It becomes to flimsy and would probably break.
Day 20
https://instagram.com/p/2h7d9Jg5Tl/?taken-by=funvill
Got the LEDs and the brains working in the Untztrument trellis midi kit I from Adafruit and started in day 4. It works! This thing is a lot of fun to play with.
Day 21
https://instagram.com/p/2iUnUdg5bv/?taken-by=funvill
Got the Arcade button midi control from day 3 wired up and working. This makes a lot of noise when pressing the buttons but its FUN and you can really hammer on the buttons without breaking anything. 4 hours of crimping, soldering, coding, mapping, debugging. Arcade button midi controller with a teensy.
Day 22
https://instagram.com/p/2pw8beA5VH/?taken-by=funvill
Another test cut for the for the Pocket Universe panels. Made in wood with VHS’s laser cutter. I like this one a lot and it definitely made the cut. This design was done for this project by @Adam_Barlev
Day 23
https://instagram.com/p/2pxKovg5VX/?taken-by=funvill
Another test cut of panels for the Pocket Universe project. This one is done in paper because I ran out of wood. This design was done for this project by @Adam_Barlev. Thank you !
Day 24
https://instagram.com/p/2pxxEfA5V-/?taken-by=funvill
Another test cut for the fairy door NSG project. I like this design over the ones that I made in day 9. It still needs more work but its getting there.
Day 25
https://instagram.com/p/2saM1Kg5UC/?taken-by=funvill
A business card that I was working on an abandoned as it fine print on the “print print” sponsorship from Maker Faire and found it to be unreasonable. Sigh…
Day 26
https://instagram.com/p/2uWxapg5an/?taken-by=funvill
Kit build day, I made a L3D cube. Quick easy build and the dome is fun to play with.
Day 27
Video
https://instagram.com/p/3FWDAoA5VN/?taken-by=funvill
Picture in triangle
https://instagram.com/p/3FkLcag5d1/?taken-by=funvill
Spent the entire day at Maker Labs running in to constant problems with (My designs) but gone the first panel cut. I have a lot of updates to do to my other designs before I go back and cut the rest. Some of the detailed sections of this panel could not be cut with the router bit that I selected.
Day 28
https://instagram.com/p/3Il_E4A5UE/?taken-by=funvill
Second panel for the pocket universe Dome project. I like this one a lot.
Day 29
https://instagram.com/p/3ImNIuA5UO/?taken-by=funvill
This panel is like a picture frame, the hole in the center will be filled with a laser cut design.
Day 30
https://instagram.com/p/3ImeBcA5Uh/?taken-by=funvill
Large picture frame style panel. I don’t like this one as much as I like the smaller one from day 29.
Day 31
Full size
https://instagram.com/p/3Keg4GA5U_/?taken-by=funvill
Close up
https://instagram.com/p/3Keu78A5VV/?taken-by=funvill
A massive 70cm laser cut of branches. This will be one of the centers of the “frame” style panels from day 30. This took a lot longer then I thought it would but looks great! .
Day 32
https://instagram.com/p/3KfRxPA5V8/?taken-by=funvill
A very quick thank you card for a friend’s wedding. 8 mins to design, 45 secs to cut.
Day 33
https://instagram.com/p/3Kgkw8A5X7/?taken-by=funvill
A test of one of the designs for Fairy Door workshop. I have a moderate to extreme dislike for sparkles. This is from the template created in day 24
Day 34
https://instagram.com/p/3NuoHvg5aO/?taken-by=funvill
Test cut panel for the pocket universe dome project. This one might be too thin to cut with the CNC. The design came from @Adam_Barlev
Day 35
https://instagram.com/p/3Nu2S2g5aa/?taken-by=funvill
Test cut panel for the pocket universe Dome project. Variant of #34
The design came from @Adam_Barlev
Day 36
https://instagram.com/p/3QXSYlg5Ti/?taken-by=funvill
Arcade button panel for the pocket universe dome project. Most of these buttons will be wired up to lighting/sound effects on the dome its self. Although it looks pretty, i will be dismantling this panel at the end of Maker Faire. The Arcade buttons are far too precious to leave in the panel.
Day 37
https://instagram.com/p/3QXtZ7g5UB/?taken-by=funvill
The flower of life panel. I was doing my best to stay away from the hippy dippy stuff. When I asked for suggestions on what other types of panels to include this was by far the most suggested one. You gotta give the people what they want.
Day 38
https://instagram.com/p/3QYE58g5UY/?taken-by=funvill
Cthulhu panel. I don’t like how big his head is. I wish i would have just outlined his head instead of cutting it out. If I get time this one will have a green rotating to purple glow behind it. It should look quite demonic.
7 panels done, 9 more to go. 8 days left before Maker Faire. I’m am full on panic mode. Gotta get it done.