So today we checked out the [new VHS reflow oven] (VHS SMD Reflow Oven) and it is pretty awesome. Super easy to use.
@Janet @xquared and myself decided that we would all make the 5 LED strips that were designed by @Jarrett. A pretty fun build.
We tested the strips using the ESP8266 Partycat controller designed by @lukecyca. It is pretty cool using projects developed by other VHS members.
All the parts before assembly. Solder was placed on the board with a syringe and then parts placed with a pair of tweezers. About a 10 minute task
Bake in the oven for about 3-5 minutes
A quick inspection under the Microscope and then solder Gnd, +5 and data lines to the board.
A quick test with the Partycat controller shows working LEDs.
Mark